Product Review: Velleman Sa Electronic Decision Maker Kit

 

During my introduction to electrical engineering class, we had to do a couple of small soldering projects. This is a small kit that requires a push-button, some capacitors, resistors, etc to be mounted/soldered to a very small circuit board. The instructions are okay, but not the most well-written instructions. But, they are not impossible to figure out. Basically, you push the button, and either a green LED (representing "yes") or a red LED (representing "no") will light up, randomly. The board is so small that it can be difficult to work with to get the components mounted, and you will need to be careful to keep your fingers out of the way when you are soldering. It is a fun project that can be put together fairly quickly.